Tenax

TENAX STRONG EDGE 45 1.5 QUART SETStrongEdge 45, the strongest clear, Knife Grade epoxy specifically designed for fabrication and lamination. Once applied on a counter top, the stone or substrate will not delaminate or break where StrongEdge 45 has been applied! Strong Edge 45 is the clearest flowing epoxy on the market. StrongEdge 45 does not shrink, it takes a polish, as well as accepts color to color match the stone if necessary. With a 2:1 mix ratio and a set time of about 45 minutes at 75 degrees.StrongEdge 45 is made for granite, marble, all natural stone, Quartz, Engineered, ceramic and porcelain materials. It maintains the clearest epoxy with an express cure time, without losing its structural integrity.StrongEdge 45 is truly a knife grade consistency and is VOC compliant. After mixing the part A and B together, the Strongedge 45 can be used on 45 degree miter and vertical applications without running or dripping off.INSTRUCTIONS FOR USEMake sure the surface to be treated is dry, clean and free of dust. Mixing ratio of resin to catalyst is 2:1 (see chart below). Use clean tools. Stir vigorously and apply. Do not place unused product back in can. Make sure the cans are sealed tightly after use. To clean tools we suggest light solvents like acetone and butyl acetate.SHELF LIFEKeep the can can closed after using. This product will last at least 1 year under normal conditions between 65° and 77°. Keep away from heat, humidity and sun light.

Tenax TeEtch Etch & Water Mark Remover 8 ozTeEtch is a polishing compound specially formulate to remove etch marks, water marks, water rings, dull spots and even light scratches on marble, travertine, limestone, alabaster, and onyx stone. Simply apply a spoon full of TeEtch over the etch or water mark. Using a rag, rub the TeEtch over the blemish by hand. After 2 or 3 minutes the etch or water mark will be mechanically removed and repolished back to the original factory finish. TeEtch may also be used with a buffer.