Tenax

Tenax Wax Paste Black – 1 Quart

Leave a Comment /

Size: 1 QuartPREMIUM GRADE WAX – Tenax Tewax is used to increase the polishing effect on onyxes, marble, natural stones, granite, agglomerates, terrazzo. Also it is used to brighten up a lost polish. The application may increase the polish from 5-6 to 15-16 points of gloss. This product is completely without solvents which contains trichloroethylene, that may cause dangerous irreversible effects to humans. Tenax solid wax is a result of special waxes melted through solvents that allow a high penetration level on treated material leading to a long-lasting effect.Directions: Make sure surface is clean and completely dry. The presence of water, dust or dirty matter may affect the result. Spread Tewax uniformly on surface using a clean sponge or cloth. Let the wax completely dry and clean with a clean cloth. If wax is not dry it will not shine after removal. Remove any excess immediately. We suggest testing this on a small hidden area before use.This product will treat approximately 215 – 323 sq. ft. depending on the porosity of the material.Shelf Life: This product will last at least 2 years if kept between 65° and 77°. Keep away from heat, humidity and sunlight.

Tenax Wax Paste Black – 1 Quart Read More »

Tenax StrongEdge Express 1.5 Quart Set

Leave a Comment /

TENAX STRONGEDGE EXPRESS 1.5 QUART SETTenax StrongEdge EXPRESS, the strongest clear, epoxy specifically designed for fabrication and lamination. Once applied on a countertop, the stone or substrate will not delaminate or break where Tenax StrongEdge EXPRESS has been applied! StrongEdge EXPRESS is the clearest epoxy on the market. Tenax StrongEdge EXPRESS does not shrink, it takes a polish, as well as accepts color to color match the stone if necessary. With a 2:1 mix ratio and a set time of about 40 minutes at 75 degrees, Tenax StrongEdge EXPRESS maintains the clearest epoxy with an express cure time, without losing its structural integrity. VOC Compliant.INSTRUCTIONS FOR USEMake sure the surface to be treated is dry, clean and free of dust. Mixing ratio of resin to catalyst is 2:1 (see chart below). Use clean tools. Stir vigorously and apply. Do not place unused product back in can. Make sure the cans are sealed tightly after use. To clean tools we suggest light solvents like acetone and butyl acetate.SHELF LIFEKeep the can can closed after using. This product will last at least 1 year under normal conditions between 65° and 77°. Keep away from heat, humidity and sun light.

Tenax StrongEdge Express 1.5 Quart Set Read More »

Tenax Ager Color Enhancer – 1 Quart

Leave a Comment /

Tenax Ager Color Enhancing Sealer 1 QuartTenax Ager Stone Color Enhancer and Sealer is suitable for enhancing all types of marbles, travertines, stones, granites and agglomerates.Tenax Ager Stone Color Enhancer and Sealer is used to obtain a “wet” effect both for indoor and outdoor application. Also suggested for use on surfaces that are flamed, rough or sanded to obtain a “wet” effect. Oil BasedTenax Ager Stone Color Enhancer and Sealer provides a deep rich color. Excellent for matching the edge of the stone with the surface polish. Outstanding for hiding micro fissures and small scratches.Tenax Ager Stone Color Enhancer and Sealer protects surfaces against oil and water and provides protection against stains.Tenax Ager Stone Color Enhancer and Sealer works well in both indoor and outdoor environments, is UV Stable and does not change color when exposed to the sun.Tenax Ager is not just an enhancer. Tenax Ager is a PREMIUM grade high quality sealer that can last for years and provides protection against stains.There are other knock-off stone color enhancers on the market. But NOTHING compares to the longevity and richness of Tenax Ager Stone Color Enhancer and Sealer. Other stone darkeners may initially look the same but they will fade quickly and not protect the stone.So rather than trying to save a couple of dollars and go with an imitation, buy the Original and Best Stone color Enhancer. Buy Tenax Ager Stone Color Enhancer and Sealer!The ORIGINAL stone color enhancer. Nothing compares to Tenax Ager Stone Color and Enhancer.DIRECTIONS FOR USING TENAX AGER STONE COLOR ENHANCER AND SEALER: This product must be evenly applied on a clean, dry surface. Spread Tenax Ager evenly with cloth or sponge until surface no longer absorbs product. Immediately buff with a clean cloth. Any excess must be removed immediately after the application. Drying time is approximately 1 hour. On floor applications please wait 24 hours before walking on surface. Water repellent in about 24 hours from application.1 quart of Tenax Ager Color Enhancer and Sealer treats approximately 160-180 sq. ft.Reseal can thoroughly after use. Keep away from heat, humidity and sunlight. Please read instructions and safety data sheet before use.IMPORTANT: When using Tenax Ager Stone Color Enhancer and Sealer for the first time we suggest testing on a small hidden part first.

Tenax Ager Color Enhancer – 1 Quart Read More »

Tenax Rust Remover Poultice Powder 8oz

Leave a Comment /

Tenax TeRust Rust Remover 8 ozTeRustRust Remover powder is designed to remove rust stains out of granite, marble, travertine, limestone, terrazzo, concrete, brick, and sanded grout. TeRust contains a special blend of chelates for removing rust stains from stone. By utilizing the stain process reversal technique, the TeRust Rust Stain Remover powder draws the stain out of the stone. Scoop out the needed amount of powder. Apply water to make a toothpaste consistency. Cover with plastic wrap and make several toothpick holes in the plastic wrap. Within 24-48 hours after the powder has dried, remove the poultice and the stain will be gone! NOTE: Calcium based stones may etch and require repolishing.

Tenax Rust Remover Poultice Powder 8oz Read More »

Crystal Knife Grade – Water Clear 1 Liter

Leave a Comment /

TENAX CRYSTAL KNIFE GRADE WATER CLEAR 1 LITERCrystal knife is a high quality extra clear polyester mastic used to vertically or horizontally:RepairRebuildBondFillCrystal is very smooth in consistency, and will cure shiny, is very polishable and colors easily to match granite and other stones. It is perfectly suited for any application where the adhesive or seem/joint must be hidden. It cures fast and bonds extremely strong. Cures in lower temperatures. Not suitable for temperatures below 32°. Recommended for interior use. UV resistant.INSTRUCTIONS FOR USE:Ensure that the surface to be treated is dry, clean and free of dust. If using color add before adding catalyst to match the desired hue and then add the catalyst. Mix glue and catalyst according to technical data below and stir thoroughly. Do not put the mixed glue back in the can.SHELF LIFE:Keep the can can closed after using. This product will last at least 6 months under normal conditions between 65° and 77°. Keep away from heat, humidity and sun light.

Crystal Knife Grade – Water Clear 1 Liter Read More »

Tenax Proseal Nano 1 QUART – Water-Oil-Repellent Stain-Resistant Natural Effect

Leave a Comment /

Tenax Proseal Nano WATER-OIL-REPELLENT STAIN-RESISTANT NATURAL EFFECT Proseal Nano is a stone sealer formulated specifically for quartzite material. This solvent-based impregnating sealer also works on many other natural stone surfaces including: Quartzite Marble Limestone Travertine Concrete Agglomerates Terracotta Onyx Slate Granite Sandstone Proseal Nano Quartzite stone sealer is an excellent stone sealer for glossy and polished surfaces even if the stone has a higher absorption rate. It penetrates and settles into the material’s micro-pores and protects the stone from all kinds of dirt. Additionally, Proseal Nano won’t alter the look of the stone or affect its breathability Proseal Nano Advantages There are many advantages to choosing Proseal Nano Quartzite sealer. The first is that it provides protection in the microporosities of the stone on which it is used. Even porous surfaces are protected when using this sealer. Proseal Nano is specifically made for use on countertops and makes maintaining and restoring a kitchen countertop much easier. It can be used in multiple environments including outdoor kitchens and inside the home on kitchen countertops. At A Glance High Stain Protection Even On Very Porous Surfaces Impregnating No Hydrocarbons Ideal for Countertops Makes Countertop Maintenance & Restoration Easier Indoor & Outdoor Use 215-323 Sq Ft Coverage Per Liter How to Use: Using Proseal Nano on quartzite countertops or other natural stone surfaces is easy when used in the following manner. Please follow these steps: Before treating a surface for the first time, test the product on an inconspicuous part of the stone or on a sample to preview the affects. Clean the stone surface thoroughly and then dry it completely to remove any dust, dirt, or other matter that will affect the performance of the sealer. Using a brush, sponge, clean cloth, or low-pressure sprayer, apply the sealer to the surface of the stone evenly. Remove any excess sealer from the surface of the stone 4-5 minutes after applying to avoid sticky build up on the stone. Repeat steps 3 and 4 approximately 10-15 minutes after the first application. Wait 24 hours for the surface to achieve the anti-staining properties. If using on a floor surface, wait 24 hours before walking on the treated area. After using Proseal Nano on quartzite or other surfaces, be sure to reseal the container completely.

Tenax Proseal Nano 1 QUART – Water-Oil-Repellent Stain-Resistant Natural Effect Read More »