Stone Sealer

TILE CLEANER & PORCELAIN STAIN REMOVERBooster is a multipurpose tile and hard surface cleansing product that can be used for a variety of cleaning tasks. It can be used as a stain remover (full strength) on specific materials or as a cleaner (diluted). Booster Tile Cleaner can be mixed for use in removing the following discolorations on hard surfaces:Stubborn Organic DirtRubber MarksWaxesEpoxy ResidueGENERAL PURPOSE CLEANINGBooster can be used as a high powered cleaner on a variety of materials. When it is diluted to the proper strength, it can be used to clean stubborn dirt and grime from the following surfaces:CeramicPorcelainUnpolished StoneGlazed CeramicCementPVCGraniteUnpolished MarbleNon-glossy Cement AgglomerationTo use Booster as a power cleansing agent, simply follow these instructions:Mix 1 part Booster with 20 parts water.Apply the mixture to the surface to be cleaned.Leave mixture on surface for 5-10 minutes.Work the mixture using a brush while wearing hand protection.Rinse the surface thoroughly to remove all Booster.CAUTION:When using Booster as a Tile Cleaner, be sure to wear appropriate hand protection. Additionally, for stubborn stains higher strength mixtures can be used. If you need to use a stronger mix, be sure to test it in an inconspicuous location before using. Tile cleaner to water ratios include:BOOSTER:WATER MIX RATIOS1:20 = Standard Ratio (Recommended)1:10 = Tougher Dirts Ratio1:5 = Stubborn Dirts RatioPORCELAIN STAIN REMOVALBooster tile cleaner and porcelain stain remover can be used to remove stains from porcelain stoneware. To use Booster as a porcelain stoneware stain remover apply as follows:Apply undiluted Booster to the porcelain sotneware using a small brush or a paint brush.Allow the Booster to sit on the area for approximately 10 minutes.Use a scrub brush in order to scrub away residues.Rinse thoroughly with water.For particularly stubborn stains, cover the stain with plastic and leave covered for several hours on epoxy residues.SAFETY RULES:Read the information on the safety data sheet and the instructions on the package/can before use.WARNINGS:Keep out of the reach of children.Avoid contact with the eyes and skin.Do not mix with other substances.Do not use as a cleaner for waxed and glossy surfaces.SHELF LIFE:The product will last at least 12 months in normal condition, kept away from heat, humidity and sunlight. Close the package after usage.

Tenax Hydrex Stone Sealer 1 ltOUR MOST POPULAR GRANITE SEALER. Tenax Hydrex Stone Sealer is a penetrating sealer that prevents liquids (stains) from penetrating into the material through it micro-porosities. Tenax Hydrex Stone Sealer is both waterproof and oil proof. Excellent for granite, carrara, Thassos, Trani, Botticini, marfill and similar stones. It is especially affective on polished granite and polished marbles. Tenax Hydrex Sealer allows the stone to breathe to maintain its natural characteristics. Tenax Hydrex Sealer may be used both indoors and outdoors. It does not change the color of the stone. Tenax Hydrex Sealer operates on the surface of materials.DIRECTIONS: This product must be evenly applied on a clean, dry surface. Spread Tenax Hydrex Stone Sealer evenly using a clean sponge or cloth. Apply until surface no longer absorbs product. Immediately clean/buff with a clean dry cloth. Excess product may create a superficial glossy and sticky film so it is important to remove excess immediately after application. After waiting 10-15 minutes repeat procedure. If used on floors wait 24 hours before walking on surface.1 liter of Tenax Hydrex Stone Sealer will treat approximately 215-323 square feet of stone depending on the porosity of the stone.IMPORTANT: When using Tenax Hydrex Stone Sealer for the first time we suggest testing on a small hidden area first.Shelf Life: This product will last at least 2 years if kept between 65° and 77°. Keep away from heat, humidity and sunlight.