no scrubbing

Eaco Chem Calcite Presoak – Remove Calcite from Clay Brick – 1 Gallon

Leave a Comment /

1 GallonRemoves Calcite on Clay Brick (Only!)Calcite Presoak is designed as a pre-soak to facilitate the removal of calcite on clay brick (USE ON CLAY BRICK ONLY). Used in conjunction with NMD 80, this combination will ensure the complete removal of calcite.First apply the Calcite Presoak undiluted and allow it to dwell on the surface for approximately five minutes. Repeat this process without rinsing until little pin holes have opened up. Then apply NMD 80 diluted four parts water to one part solution (4:1) without rinsing off the Calcite Presoak; allow a five to ten minute dwell time. Rinse completely to get the desired results.For Use On: Clay brickUse to Remove: CalciteProduct DetailsPowerfully penetrates and softens calciteCoverage rates will vary based on severity of calcite build-up. Proper testing will determine actual coverage rate.

Eaco Chem Calcite Presoak – Remove Calcite from Clay Brick – 1 Gallon Read More »

EaCo Chem HD Degreaser – Extended Dwell Carbon and Grease Remover – 1 Gallon

Leave a Comment /

1 GALLONExtended dwell carbon & grease removerHD Degreaser will penetrate layers with a combination of aggressive caustics, buffering and stabilizing compounds that keeps the product from drying out. This allows a fast and long term attack with minimal degradation of surfaces. The product is also used for soaking through very thick layers of clay, grease, foodstuffs, and hydraulic fluid and oil stains in one application.Size: 1 Gallon For Use On: Concrete Use to Remove: Carbon, grease and oil stainsProduct DetailsExcellent adhesion and penetrating cleaning ability on vertical and horizontal surfacesWill not damage wires or hoses in engine compartmentsFast and long term attack with minimal degradation of surfaces

EaCo Chem HD Degreaser – Extended Dwell Carbon and Grease Remover – 1 Gallon Read More »

EaCo Chem LCS – Water Based Stripper – 1 Gallon

Leave a Comment /

1 GALLONLCS is a water based stripper for removing sealers, stains, and paint. The wide range of applications for LCS includes removing graffiti, deck stains, multiple layers of latexes, acrylic latexes, alkyds, certain enamels, oil based stains, and other resin coatings. It can be used to remove petroleum based and food oil stains from concrete dumpster pads at restaurants and from stainless steel delivery tankers.For Use On: Sealers, stains, and paintUse to Remove: Graffiti, deck stains, multiple layers of latexes, acrylic latexes, alkyds, certain enamels, oil based stains, and other resin coatings. It can be used to remove petroleum based and food oil stains from concrete dumpster pads at restaurants and from stainless steel delivery tankers.Product DetailsNon-FlammableCitrus OdorAt high dilutions, LCS is an all purpose cleaner that creates a notable shine.CoverageCoverage rates will vary from 125 – 250 sq. ft. per gallon depending on the surface porosity, texture and severity of staining.

EaCo Chem LCS – Water Based Stripper – 1 Gallon Read More »

EaCo Chem Polished Stone Cleaner – 1 Gallon

Leave a Comment /

1 GallonInterior Marble Cleaner for Floors and WallsThis unique chemistry is a neutral cleaner with a lot of advantages for interior cleaning. A very mild pleasant odor and non-corrosive, non-hazardous components make it safe for both the user and the environment. P.S.C. is capable of removing smoke, heavy finger soils, sealers and waxes, and foot traffic soil without any harm to the marble substrate.Another real benefit of the product is that it does not foam on pickup, so that if you must vacuum the residue you will not waste time clearing foam or de-foaming. All these characteristics make the soap readily disposable to sanitary sewer or easily treated in a waste reclaim system.For Use On: Marble, granite, or any polished stoneUse to Remove: Smoke, heavy finger soils, sealers and waxes, and foot traffic soilProduct DetailsRenews the surface of the marble without any hazardsNeutral pH makes the soap personally and environmentally safeLow foaming non-emulsifying characteristics make it great for disposal or treatmentCoverage varies from 100 – 250 sq. ft. per gallon depending on the surface porosity, texture and severity of staining.DilutionsDilutions will vary based on the severity of the stain and type of surface.Use undiluted (straight) up to 50:1 for regular light duty cleaningUse undiluted (straight) up to 4:1 for removing smoke damage or sealers4:1 – 20:1 for removing heavy finger soil or foot traffic dirt Pre-Testing

EaCo Chem Polished Stone Cleaner – 1 Gallon Read More »

EaCo Chem Hot Stain Remover – Remove Food, Oil, Petroleum & More – 1 Gallon

Leave a Comment /

1 GALLONFood and Oil Stain Remover from ConcreteA powerful stain lifter for masonry and concrete, Hot Stain Remover is a high pH alkaline cleaning product that will remove both food and petroleum oil staining and remove heavy carbon deposits and oil from concrete and masonry. Use to Remove: Use Hot Stain Remover to remove food and petroleum oil staining and carbon staining!For Use On: Clay brick, concrete brick, glazed brick, buff brick, red brick, colored block, smooth block, burnished block, precast concrete, limestone, natural stone, stone veneer, cast stone, hardscape, clay pavers, concrete pavers, colored mortarProduct DetailsRemoves food and petroleum oil stainsRemoves carbon stainsIdeal for drive-thru’s and dumpster padsRemoves smoke residue from masonryCleans up groutDilutionsUse Hot Stain Remover undiluted for extremely difficult stains up to 10 part water to 1 part solution less difficult applications

EaCo Chem Hot Stain Remover – Remove Food, Oil, Petroleum & More – 1 Gallon Read More »

Eaco Chem GRAF-EX – Outstanding Removal of Inks & Paints – 1 Gallon

Leave a Comment /

1 GALLONGraf-Ex is an easy-to-use, multipurpose modern day stripper designed to be used where safety and performance are of equal importance. – Graf-Ex is a non-dilutable product that is outstanding in the removal of inks and paints from painted surfaces. – Graf-Ex does not harm most substrates and will not raise the grain of wood, cause flash rusting in metal or damage fiberglass. Graf-Ex is also an excellent adhesive remover, from decals to construction adhesives.For Use On: Interiors, painted surfaces and fiberglass.Use to Remove: Ink, marker and graffiti. Graf-Ex will also remove decal adhesive, silicone caulk and sealer from sensitive surfaces.Product Details:- Will not harm most substrates • Mild on skin • Non-flammable and biodegradable • Will not raise the grain of wood or cause flash rusting on metal- Will not work on epoxy or urethane type coatings • Do not use on Plexiglas.

Eaco Chem GRAF-EX – Outstanding Removal of Inks & Paints – 1 Gallon Read More »

EaCo Chem EF-Fortless – Remove Powdery Efflorescence on Brick & Mortar – 5 Gal

Leave a Comment /

5 GALLONMelts Away Powdery EfflorescenceEF-Fortless is a truly remarkable soap solution that melts away powdery efflorescence and haze from clean-up efflorescence, and helps to control its return. This product is mildly acidic and great for use on color sensitive surfaces, since it will not discolor brick, block or mortar. It can be used on slurry-dyed block and similar substrates.Simply apply EF-Fortless undiluted and wait for the foam to collapse. Reapply as needed until there is no foaming on contact. With EF-Fortless only, the product does not need to be rinsed from vertical surfaces (option).For Use On: Brick, block, mortar, glass Use to Remove: Powdery efflorescence and haze from clean-up efflorescenceProduct DetailsHelps control return of efflorescenceSafe on glassDo not have to use pressure washerImproves productivityReduces Liability

EaCo Chem EF-Fortless – Remove Powdery Efflorescence on Brick & Mortar – 5 Gal Read More »

EaCo Chem EF-Fortless – Remove Powdery Efflorescence on Brick & Mortar – 1 Gal

Leave a Comment /

1 GALLONMelts Away Powdery EfflorescenceEF-Fortless is a truly remarkable soap solution that melts away powdery efflorescence and haze from clean-up efflorescence, and helps to control its return. This product is mildly acidic and great for use on color sensitive surfaces, since it will not discolor brick, block or mortar. It can be used on slurry-dyed block and similar substrates.Simply apply EF-Fortless undiluted and wait for the foam to collapse. Reapply as needed until there is no foaming on contact. With EF-Fortless only, the product does not need to be rinsed from vertical surfaces (option).For Use On: Brick, block, mortar, glass Use to Remove: Powdery efflorescence and haze from clean-up efflorescenceProduct DetailsHelps control return of efflorescenceSafe on glassDo not have to use pressure washerImproves productivityReduces Liability

EaCo Chem EF-Fortless – Remove Powdery Efflorescence on Brick & Mortar – 1 Gal Read More »