Metals

Oxy-Gone Rust Remover & Metal Treatment 1 Gallon of Oxy-Gone Rust Remover withtwo sprayersand empty refill quarts A balanced formula of phosphoric acid, dichromate, wetting agents and extenders, to prepare metal surfaces for painting. Safely dissolves bleeding rust from painted surfaces. Easy to use, fast results. OXY GONE is water thin, and therefore covers a larger area than paint, and goes on easily. It is equally effective on exterior and interior work alike Specifications · A rust-inhibiting coating that is not a paint. Neutralizes existing rust by changing the chemical composition of rust to an inert protective barrier coating to stop future rusting. · You can apply by rag, brush, hand sprayer, roller, and even pump-up sprayer on larger surfaces. Or you can immerse smaller parts completely as in the case of a dip tank. Remember to wear gloves and or goggles for protection. · Recommended for use under oil base paint or primer. One gallon of Oxy-Gone covers 600 sq. feet. It dries overnight, makes a lasting bond between rusted metal and paint. (Note: Oxy-Gone is not actually a paint.) · Use a wire brush or wire wheel to remove loose paint, rust scales, dirt, oil, and anything else accumulated on the surface. After doing this, apply a coat of Oxy-Gone and let it dry (overnight). · Sometimes, a dry, grayish white powdery film develops. Simply brush off before painting. Oxy-Gone is water-based and ready to use. Directions OXY-GONE is a metal primer NOT PAINT. You do not have to remove tight rust, merely remove loose paint, and rust scale, dirt and other accumulation with a wire brush and apply a coat of OXY-GONE as it comes in the container, let it dry thoroughly, then apply the paint. Surface must be free of grease, oil, scaling paint or loose rust. Where rust is extremely heavy, two coats of OXY-GONE may be necessary to thoroughly penetrate and blacken the surface to be painted. A dry powdery, grayish white surface may develop indicating that OXY-GONE has reacted with the metal. Brush o­ any loose powder before painting. Recommended for use under oil base primer or paint. Test sample before using under epoxy or latex-base applications. NEW METALS For new ferrous metals, remove dirt, grease or oil, apply OXY-GONE, let dry thoroughly, then paint. On galvanized surfaces, two coats of OXY-GONE are recommended to thoroughly coat and etch the metal. When applied to rusted surfaces, OXY-GONE causes iron oxide (rust) to chemically change to iron phosphate an inert, hard substance that turns the metal black. A paint job will last much longer after an application of OXY-GONE because subsequent paint coating attaches itself so tightly that moisture and oxygen cannot attack the metal. Return Policies When we receive your return, a refund will be issued to you minus the 15% restocking fee. Defective equipment is covered under the manufacturer’s warranty. Unless an item is returned for defect, all items must be returned in original unused condition with original packaging. A 15% restocking fee will apply to returns as well as a deduction for our cost in shipping the item to you. Within 14 days from shipment date, you may return any unopened product in original unused condition with original packaging. Returns are subject to a minimum 15% restocking fee. Buyer is responsible for any shipping charges incurred to return the item to us. Defective Items: Eligible* defective products may be returned for an exchange within 14 days from the date your product was received. Defective products must be returned in the original packaging with all original contents. Product must be returned no later than 7 days from the receipt of your return authorization number. Buyer is responsible for any shipping charges incurred to return the item to us. We do not accept open box, non-defective item returns. *Most items originally thought to be defective turn out to be a result of user error or compatibility issues. If you believe you may have received a defective item, we encourage you to contact us and see if the issue you are experiencing can be resolved without return and replacement. Refusing A Package: If you should place an order with us and then refuse a package for any reason other than damage to the merchandise in the box, please know that you will receive a refund for the amount of your original transaction less any shipping charges we have incurred in getting the package to you originally as well as the cost of the return shipping By visiting or shopping at Best Cleaning Supply, you agree to accept these conditions.