Italy

Tenax Ager Color Enhancer – 1 Quart

Tenax Ager Color Enhancing Sealer 1 QuartTenax Ager Stone Color Enhancer and Sealer is suitable for enhancing all types of marbles, travertines, stones, granites and agglomerates.Tenax Ager Stone Color Enhancer and Sealer is used to obtain a “wet” effect both for indoor and outdoor application. Also suggested for use on surfaces that are flamed, rough or sanded to obtain a “wet” effect. Oil BasedTenax Ager Stone Color Enhancer and Sealer provides a deep rich color. Excellent for matching the edge of the stone with the surface polish. Outstanding for hiding micro fissures and small scratches.Tenax Ager Stone Color Enhancer and Sealer protects surfaces against oil and water and provides protection against stains.Tenax Ager Stone Color Enhancer and Sealer works well in both indoor and outdoor environments, is UV Stable and does not change color when exposed to the sun.Tenax Ager is not just an enhancer. Tenax Ager is a PREMIUM grade high quality sealer that can last for years and provides protection against stains.There are other knock-off stone color enhancers on the market. But NOTHING compares to the longevity and richness of Tenax Ager Stone Color Enhancer and Sealer. Other stone darkeners may initially look the same but they will fade quickly and not protect the stone.So rather than trying to save a couple of dollars and go with an imitation, buy the Original and Best Stone color Enhancer. Buy Tenax Ager Stone Color Enhancer and Sealer!The ORIGINAL stone color enhancer. Nothing compares to Tenax Ager Stone Color and Enhancer.DIRECTIONS FOR USING TENAX AGER STONE COLOR ENHANCER AND SEALER: This product must be evenly applied on a clean, dry surface. Spread Tenax Ager evenly with cloth or sponge until surface no longer absorbs product. Immediately buff with a clean cloth. Any excess must be removed immediately after the application. Drying time is approximately 1 hour. On floor applications please wait 24 hours before walking on surface. Water repellent in about 24 hours from application.1 quart of Tenax Ager Color Enhancer and Sealer treats approximately 160-180 sq. ft.Reseal can thoroughly after use. Keep away from heat, humidity and sunlight. Please read instructions and safety data sheet before use.IMPORTANT: When using Tenax Ager Stone Color Enhancer and Sealer for the first time we suggest testing on a small hidden part first.

Tenax Ager Color Enhancer – 1 Quart Read More »

Tenax Rust Remover Poultice Powder 8oz

Tenax TeRust Rust Remover 8 ozTeRustRust Remover powder is designed to remove rust stains out of granite, marble, travertine, limestone, terrazzo, concrete, brick, and sanded grout. TeRust contains a special blend of chelates for removing rust stains from stone. By utilizing the stain process reversal technique, the TeRust Rust Stain Remover powder draws the stain out of the stone. Scoop out the needed amount of powder. Apply water to make a toothpaste consistency. Cover with plastic wrap and make several toothpick holes in the plastic wrap. Within 24-48 hours after the powder has dried, remove the poultice and the stain will be gone! NOTE: Calcium based stones may etch and require repolishing.

Tenax Rust Remover Poultice Powder 8oz Read More »

Crystal Knife Grade – Water Clear 1 Liter

TENAX CRYSTAL KNIFE GRADE WATER CLEAR 1 LITERCrystal knife is a high quality extra clear polyester mastic used to vertically or horizontally:RepairRebuildBondFillCrystal is very smooth in consistency, and will cure shiny, is very polishable and colors easily to match granite and other stones. It is perfectly suited for any application where the adhesive or seem/joint must be hidden. It cures fast and bonds extremely strong. Cures in lower temperatures. Not suitable for temperatures below 32°. Recommended for interior use. UV resistant.INSTRUCTIONS FOR USE:Ensure that the surface to be treated is dry, clean and free of dust. If using color add before adding catalyst to match the desired hue and then add the catalyst. Mix glue and catalyst according to technical data below and stir thoroughly. Do not put the mixed glue back in the can.SHELF LIFE:Keep the can can closed after using. This product will last at least 6 months under normal conditions between 65° and 77°. Keep away from heat, humidity and sun light.

Crystal Knife Grade – Water Clear 1 Liter Read More »

Tenax StrongEdge 45 1.5 Quart Set

TENAX STRONG EDGE 45 1.5 QUART SETStrongEdge 45, the strongest clear, Knife Grade epoxy specifically designed for fabrication and lamination. Once applied on a counter top, the stone or substrate will not delaminate or break where StrongEdge 45 has been applied! Strong Edge 45 is the clearest flowing epoxy on the market. StrongEdge 45 does not shrink, it takes a polish, as well as accepts color to color match the stone if necessary. With a 2:1 mix ratio and a set time of about 45 minutes at 75 degrees.StrongEdge 45 is made for granite, marble, all natural stone, Quartz, Engineered, ceramic and porcelain materials. It maintains the clearest epoxy with an express cure time, without losing its structural integrity.StrongEdge 45 is truly a knife grade consistency and is VOC compliant. After mixing the part A and B together, the Strongedge 45 can be used on 45 degree miter and vertical applications without running or dripping off.INSTRUCTIONS FOR USEMake sure the surface to be treated is dry, clean and free of dust. Mixing ratio of resin to catalyst is 2:1 (see chart below). Use clean tools. Stir vigorously and apply. Do not place unused product back in can. Make sure the cans are sealed tightly after use. To clean tools we suggest light solvents like acetone and butyl acetate.SHELF LIFEKeep the can can closed after using. This product will last at least 1 year under normal conditions between 65° and 77°. Keep away from heat, humidity and sun light.

Tenax StrongEdge 45 1.5 Quart Set Read More »

Guardsman 8.45 Oz. Leather Care Protect & Preserve 471000 Guardsman 471000

Creates an invisible barrier to protect leather against premature aging and irreversible damage from penetrating stains. Protects leather’s original feel and color – keeps it looking its best and feeling soft and supple. Makes cleaning easier and more effective. Made exclusively for Guardsman in Italy by a world leader in leather finishing technology. Should be used with Clean & Renew for Leather.

Guardsman 8.45 Oz. Leather Care Protect & Preserve 471000 Guardsman 471000 Read More »

Tenax Hydrex Polished Stone Sealer – 1 Quart

Tenax Hydrex Stone Sealer 1 ltOUR MOST POPULAR GRANITE SEALER. Tenax Hydrex Stone Sealer is a penetrating sealer that prevents liquids (stains) from penetrating into the material through it micro-porosities. Tenax Hydrex Stone Sealer is both waterproof and oil proof. Excellent for granite, carrara, Thassos, Trani, Botticini, marfill and similar stones. It is especially affective on polished granite and polished marbles. Tenax Hydrex Sealer allows the stone to breathe to maintain its natural characteristics. Tenax Hydrex Sealer may be used both indoors and outdoors. It does not change the color of the stone. Tenax Hydrex Sealer operates on the surface of materials.DIRECTIONS: This product must be evenly applied on a clean, dry surface. Spread Tenax Hydrex Stone Sealer evenly using a clean sponge or cloth. Apply until surface no longer absorbs product. Immediately clean/buff with a clean dry cloth. Excess product may create a superficial glossy and sticky film so it is important to remove excess immediately after application. After waiting 10-15 minutes repeat procedure. If used on floors wait 24 hours before walking on surface.1 liter of Tenax Hydrex Stone Sealer will treat approximately 215-323 square feet of stone depending on the porosity of the stone.IMPORTANT: When using Tenax Hydrex Stone Sealer for the first time we suggest testing on a small hidden area first.Shelf Life: This product will last at least 2 years if kept between 65° and 77°. Keep away from heat, humidity and sunlight.

Tenax Hydrex Polished Stone Sealer – 1 Quart Read More »